Aztech WL830RT4 User Manual

Also see for WL830RT4: Easy start guide Specification

Contents

User ManualForwardingThere are four submenus under the Forwarding menu: Virtual Servers, Port Triggering,DMZ and UPnP. Click any of them, and you will be able to configure the correspondingfunction. The detailed explanations for each submenu are provided below.Virtual ServersVirtual servers can be used for setting up public services on your LAN, such as DNS, Emailand FTP. A virtual server is defined as a service port, and all requests from the Internet tothis service port will be redirected to the computer specified by the server IP. Any PC thatwas used for a virtual server must have a static or reserved IP Address because its IPAddress may change when using the DHCP function. You can set up virtual servers on thispage:Virtual ServersService Port The numbers of External Ports. You can type a service port or a rangeof service ports (the format is XXX – YYY, XXX is Start port, YYY is End port).IP Address The IP Address of the PC providing the service application.Protocol The protocol used for this application, either TCP, UDP, or All (all protocolssupported by the router).Status The status of this entry either Enabled or Disabled.Page 59 of 102