Aztech WL830RT4 User Manual

Also see for WL830RT4: Easy start guide Specification

Contents

User ManualFAQ1. How do I configure the router to access Internet by ADSL users? First, configure the ADSL modem configured in RFC1483 bridge model. Connect the Ethernet cable from your ADSL modem to the WAN port on the router.The telephone cord plugs into the Line port of the ADSL modem. Login to the router, click the Network menu on the left of your browser, and clickWAN submenu. On the WAN page, select PPPoE for WAN Connection Type. Typeuser name in the User Name field and password in the Password field, finish byclicking Connect. If your ADSL lease is in pay-according-time mode, select Connect on Demand orConnect Manually for Internet connection mode. Type an appropriate number forMax Idle Time to avoid wasting paid time. Otherwise, you can select Auto-connecting for Internet connection mode.2. How do I configure the router to access Internet by Ethernet users? Login to the router, click the Network menu on the left of your browser, and clickWAN submenu. On the WAN page, select Dynamic IP for WAN Connection Type,finish by clicking Save. Some ISPs require that you register the MAC Address of your adapter, which isconnected to your cable or DSL modem during installation. If your ISP requiresMAC register, login to the router and click the Network menu link on the left ofyour browser, and then click MAC Clone submenu link. On the MAC Clone page, ifyour PC’s MAC address is proper MAC address, click Clone MAC Address and yourPC’s MAC address will fill in the WAN MAC Address field. Or else, type the MACAddress into the WAN MAC Address field. The format for the MAC Address is XX-XX-XX-XX-XX-XX. Click Save. Changes take effect after rebooting.Page 94 of 102