Aztech WL830RT4 User Manual

Also see for WL830RT4: Easy start guide Specification

Contents

User ManualICMP-FLOOD Packets threshold: (5 ~ 3600) The default value is 50. Enter a valuebetween 5 ~ 3600 packets. When the current ICMP-FLOOD Packets number sisbeyond the set value, the router will start up the blocking function immediately.Enable UDP-FLOOD Filtering Enable or Disable the UDP-FLOOD Filtering.UDP-FLOOD Packets threshold: (5 ~ 3600) The default value is 50. Enter a valuebetween 5 ~ 3600 packets. When the current UPD-FLOOD Packets numbers isbeyond the set value, the router will start up the blocking function immediately.Enable TCP-SYN-FLOOD Attack Filtering Enable or Disable the TCP-SYN- FLOODAttack Filtering.TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) The default value is 50. Enter avalue between 5 ~ 3600 packets. When the current TCP-SYN-FLOOD Packetsnumbers is beyond the set value, the router will start up the blocking functionimmediately.Ignore Ping Packet from WAN Port Enable or Disable ignore ping packet from WANport. The default is disabled. If enabled, the ping packet from the Internet cannotaccess the router.Forbid Ping Packet from LAN Port Enable or Disable forbidding Ping Packet toaccess the router from the LAN port. The default value is disabled. If enabled, theping packet from the LAN port cannot access the router. (Defends against someviruses)Click Save to save the settings.Click Blocked DoS Host Table to display the DoS host table by blocking.Blocked Host ListPage 77 of 102