User Manualports (or port section). Every group of ports must be set apart with a comma (,).For example, 2000-2038, 2050-2051, 2085, 3010-3030.Incoming Protocol The protocol used for Incoming Ports Range, either TCP or UDP,or ALL (all protocols supported by the router).Status The status of this entry either Enabled or Disabled.To add a new rule:1. Click Add New.2. Enter a port number used by the application when it generates an outgoingrequest.3. Select the protocol used for Trigger Port: TCP UDP All4. Enter the range of port numbers used by the remote system when it responds tothe PC's request.5. Select a protocol used for Incoming Ports Range: TCP UDP All6. Select the Status:7. Click Save.Page 63 of 102
