Baldor ID15J1F50-ER Installation And Operating Manual

Contents

Baldor ID15J1F50-ER Installation And Operating Manual Manual pdf 8 page image

Section 2General InformationMN715J General Information 2-1CE ComplianceA custom unit may be required, contact Baldor. Compliance to Directive89/336/EEC is the responsibility of the system integrator. A control, motor andall system components must have proper shielding grounding and filtering asdescribed in MN1383. Please refer to MN1383 for installation techniques forCE compliance.OverviewThe Baldor Series 15J control is a PWM inverter motor control. The controloperates by converting AC line power into fixed DC power. The DC power isthen pulse width modulated into synthesized three-phase AC line voltage forthe motor. In this way, the control converts the fixed input frequency tovariable output frequency to cause the motor to have variable speedoperation.The rated horsepower of the control is based on a NEMA design B four polemotor and 60Hz operation at nominal rated input voltage. If any other type ofmotor is used, or input voltage other than 230 or 460 VAC is applied to theinput terminals, the control should be sized to the motor using the rated outputcurrent of the control.The Baldor Series 15J control may be used in many different applications. Itcan be programmed to operate in a number of operating modes, PWM ratesand output current levels for custom operation.It is the responsibility of the user to determine the optimum operating mode forthe application. These choices are programmed using the keypad asexplained in the programming section of this manual.Limited WarrantyFor a period of two (2) years from the date of original purchase, BALDOR will repair or replacewithout charge controls and accessories which our examination proves to be defective inmaterial or workmanship. This warranty is valid if the unit has not been tampered with byunauthorized persons, misused, abused, or improperly installed and has been used inaccordance with the instructions and/or ratings supplied. This warranty is in lieu of any otherwarranty or guarantee expressed or implied. BALDOR shall not be held responsible for anyexpense (including installation and removal), inconvenience, or consequential damage,including injury to any person or property caused by items of our manufacture or sale. (Somestates do not allow exclusion or limitation of incidental or consequential damages, so the aboveexclusion may not apply.) In any event, BALDORís total liability, under all circumstances, shallnot exceed the full purchase price of the control. Claims for purchase price refunds, repairs, orreplacements must be referred to BALDOR with all pertinent data as to the defect, the datepurchased, the task performed by the control, and the problem encountered. No liability isassumed for expendable items such as fuses.Goods may be returned only with written notification including a BALDOR Return AuthorizationNumber and any return shipments must be prepaid.