OmniCare EVC SystemInstallation & Commissioning Manual24 OmniCare issue 1COM MUNICATIONS3.2.2 Advance Refuge Remotes (BVOCA)Figure 3.3 — Mounting Holes and Knockout Locations3.2.2.1 Connect Circuit Wiring to Termination BoardThe BVOCA Remote Units contain a Termination Board withinthe back box that allows the Circuit Cabling to be terminatedseperately, without attaching the Remote Unit.It is also possible to test the circuit cabling without the RemoteUnit connected, however once the Remote Unit is connected thejumpers shown in Figure 3.4 MUST be removed.1. If possible, before connecting the Remote Units check theCircuit Cabling for Short Circuits, Open Circuits, shorts toGround, and Correct Phasing of all conductors.2. If not already fitted, mount the supplied back box at eachRemote Unit location.
