68Power settingsIf you want to make yourtelevision start up faster, you canset a Quick-Start Timer for one ortwo specified time periods. Thiswill increase the standby powerconsumption within theseperiods compared to when thetelevision is in ordinary standby.On the other hand, you canchoose to save power on anumber of other functions in thetelevision, such as sound, pictureand network. When you set uppower saving for the picture, apreview shows you the picturequality for each option whichmakes it easier for you to selectthe combination of powerconsumption and quality thatsuits you best.In the AUTO STANDBY menu,you can set the television toswitch off automatically aftersome time without operation.Set up the power consumption for standby,sound, picture, and network. The televisioncan be set to switch itself to standby aftersome time without operation. The factorysetting is 4 hours. This function only appliesin video mode, not in audio mode.To reduce the start-up time or set up autostandby, bring up the STANDBY menu.* 1To make power saving settings for sound,bring up the SOUND menu.To make power saving settings for picture,bring up the PICTURE menu.To make power saving settings for network,bring up the NETWORK menu.When AUTO STANDBY is activated, amessage appears on your television screen ifthe television has not been operated duringthe time set in the menu. The television thenswitches to standby if you do not operate it.When no source signal has been detected for15 minutes, the television switches to standby.1 *If a Quick-Start Timer is active, yourtelevision will switch on within seconds. If youreceive your television signal from aconnected set-top box, the televisionstart-up time is also affected by the start-uptime of the box. Setting a Quick-Start Timerwill increase the power consumption withinthe specified period.Set up the power consumptionMENUSETUPPOWER SAVINGSTANDBYSOUNDPICTURENETWORK…