Quick Start GuideAdvanced sensor with dual digital displays for use with plastic and glass fiber optic assembliesFor complete technical information about this product, including dimensions, accessories, and specifications, seewww.bannerengineering.com and search 176768.WARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead toserious injury or death. This device does not include the self-checking redundant circuitry necessaryto allow its use in personnel safety applications. A sensor failure or malfunction can cause either anenergized or de-energized sensor output condition.OverviewFigure 1. DF-G1 Model Features1 Output LED2 LO/DO Switch3 RUN/PRG/ADJ Mode Switch4 Lever Action Fiber Clamp5 Red Signal Level6 Green Threshold7 +/SET/- Rocker ButtonModelsModel Outputs Connector1DF-G1-NR-2M Single NPN2 m (6.5 ft) cable, 4-wireDF-G1-PR-2M Single PNPDF-G1-NR-Q5 Single NPN 150 mm (6 in) PVC pigtail, M12 Euro QD connector,4-pinDF-G1-PR-Q5 Single PNPDF-G1-NR-Q7 Single NPNIntegral M8 Pico QD connector, 4-pinDF-G1-PR-Q7 Single PNP1 Connector options:• A model with a QD connector requires a mating cordset.• For 9 m cable, change the suffix 2M to 9M in the 2 m model number (example, DF-G1-NR-9M).• For 150 mm (6 in) PVC pigtail, M8 Pico QD connector, 4-pin change the suffix 2M to Q3 in the 2 m model number (example, DF-G1-NR-Q3).DF-G1 Expert™ Dual Display Fiber OpticLight ReceiverOriginal Document172436 Rev. C17 March 2014172436