Banner DF-G1-NS-2M Installation Manual

Also see for DF-G1-NS-2M: Quick start guide Manual Install Sheet

Contents

Banner DF-G1-NS-2M Installation Manual Manual pdf 19 page image

SpecificationsSensing Beam660 nm visible redSupply VoltageNPN/PNP models: 10 to 30 V dc Class 2 (10% max ripple)IO-Link models: 18 to 30 V dc (10% max ripple)Power and Current Consumption (exclusive of load)Standard display mode: 960 mW, Current consumption < 40 mA at24 V dcECO display mode: 720 mW, Current consumption < 30 mA at 24 VdcSupply Protection CircuitryProtected against reverse polarity, overvoltage, and transient voltagesDelay at Power Up500 milliseconds max.; outputs do not conduct during this timeOutput ConfigurationNPN/PNP models: 1 current sinking (NPN) or 1 current sourcing(PNP) output, depending on modelIO-Link models: 1 push-pull and 1 PNP (complementary outputs)Output Rating100 mA max. load (derate 1 mA per °C above 30 °C)OFF-state leakage current: NPN/PNP models: < 5 μA at 30 V dc;IO-Link models: < 50 μA at 30 V dcON-state saturation voltage: NPN: < 1.5 V; PNP /IO-Link: < 2 VOutput ProtectionProtected against output short-circuit, continuous overload, transientover-voltages, and false pulse on power upOutput Response TimeHigh Speed: 200 μs; Standard: 500 μs; Long Range: 2 ms; Extra LongRange: 5 msRepeatabilityHigh Speed: 66 μs, Standard/Long Range/Extra Long Range: 100 μsConstructionBlack ABS/polycarbonate alloy (UL94 V-0 rated) housing, clearpolycarbonate coverEnvironmental RatingIEC IP50, NEMA 1Operating ConditionsTemperature: −10 °C to +55 °C (+14 °F to +131 °F)Storage Temperature: −20 °C to +85 °C (−4 °F to +185 °F)Humidity: 90% at +60 °C maximum relative humidity (non-condensing)IO-Link InterfaceSupports Smart Sensor Profile: YesBaud Rate: 38,400 bps (COM2)Process Data Width: 16 bitsIODD files: Provide all programming options of top panel interface,plus additional functionality, see the DF-G1 Manual (P/N 161999)CertificationsInd. Cont. Eq.3TJJBanner Engineering Corp Limited WarrantyBanner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year followingthe date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacturewhich, at the time it is returned to the factory, is found to have been defective during the warranty period. This warrantydoes not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS ORIMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING ORTRADE USAGE.This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NOEVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FORANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL ORSPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THEPRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,NEGLIGENCE, OR OTHERWISE.Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming anyobligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.DF-G1 Expert™ Dual Display Fiber AmplifierPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

/ 19

Related manuals for Banner DF-G1-NS-2M