Banner L-GAGE LTF Instruction Manual

Also see for L-GAGE LTF: Quick start guide Quick start guide Instruction manual

Banner L-GAGE LTF Instruction Manual Manual pdf 27 page image

3.7.1 Input TypeThe Type option sets the input type.Navigate: MENU > INPUT > TypeRemote Input: Not availableDefault: DisabledInput Type DescriptionTeach The remote input is used to TEACH and program the sensor.LasrEnbl The remote input is used to control when the laser emitter is On/Off.Trigger The remote input is used to trigger advanced measurements To enable advanced measurements, theInput Type option must be set to Trigger (seeTrigger on page 28).SyncMstr The remote input is used as the Master Sync output to an attached Slave sensor (seeSync Master/Slaveon page 34).SyncSlve The remote input is used as the Slave Sync input from an attached Master sensor (seeSync Master/Slave on page 34).Disabled The remote input is disabled. (Default)3.7.2 Input ActiveThe Active option sets the active state of the remote input. Use the Active options to change the active input to Low orHigh.Navigate: MENU > INPUT > ActiveRemote Input: Not availableDefault: LowInput Active DescriptionLow The remote input detects low (0 V) inputs and high-to-low transitions. (Default)High The remote input detects high (V+) inputs and low-to-high transitions.3.8 Measure Menu (MEASURE)Use this menu to view or change the:• Speed• Trigger MENU MEASUREororGo Back to Parent MenuSelect Menu ItemPress to Save SettingPress and Hold to Go Backto Run ModeTrigger AverageTrigger SampleSpeed FastTrigger MaxTrigger MinTrigger RangeTrigger TrackMaxTrigger TrackMinMEASURE TriggerMEASURE SpeedSpeed StandardSpeed MediumSpeed SlowFigure 21. Measure Menu MapL-GAGE® LTF Time of Flight Laser Distance Sensorwww.bannerengineering.com - Tel: +1.763.544.3164 27