Banner Q3X Instruction Manual

Also see for Q3X: Installation Instruction manual

Banner Q3X Instruction Manual Manual pdf 14 page image

1x2x Teach SelectionStarts selected Teach (same function as pressing Teach Button for > 2 sec)1x Second pulse completes Teach (Two-point and Dynamic Teach only)0.04 seconds < T < 0.8 secondsTiming between Pulse groups > 1 secondPulse Timing (T)(gray wire is input wire)2x1x Two-point static background suppressionDynamic background suppression4x3x One-point window setOne-point light set4x2x1x Button UnlockButton LockButton Lock8x Reset to Factory Defaults (maintains remote input = SET)RemoteInput5x One-point dark setREMOTE SETUP REMOTETEACH= SetFigure 6. Remote Input Map3.3.1 Select the TEACH mode using the Remote Input1. Access the TEACH selection.Action ResultDouble-pulse the remote input.T TT displays.2. Select the desired TEACH mode.Action ResultPulses TEACH Mode1 T Two-point static TEACH2T TTDynamic TEACH3T TTTTOne-point window set4T TT T TT TOne-point light set5T TTTTTTTTOne-point dark setThe selected TEACH method displays for afew seconds and the sensor returns to Runmode.Q3X Laser Contrast Sensor14 www.bannerengineering.com - Tel: 763.544.3164