Banner Q3X Instruction Manual

Also see for Q3X: Installation Instruction manual

Banner Q3X Instruction Manual Manual pdf 9 page image

3 Sensor ProgrammingProgram the sensor using the buttons on the sensor or the input wire (limited programming options; see Remote Input onpage 13 for details).In addition to programming the sensor, use the input wire to disable the buttons for security, preventing unauthorized oraccidental programming changes. See Locking and Unlocking the Sensor Buttons on page 15 for more information.3.1 Setup Mode1. Access Setup mode from Run mode by pressing and holding MODE for longer than 2 seconds.2. Use or to navigate through the top menu.3. Select the desired submenu by pressing and simultaneously.4. Press or to view the available options in the submenu.5. Select a submenu option.• Press and simultaneously to select and save a submenu option and return to the top menu.• Press and simultaneously for longer than 2 seconds to select and save a submenu option andreturn to Run mode.NOTE: The current submenu selection is solid, all other selections flash.To exit Setup mode from the top menu and return to Run mode, navigate to and press andsimultaneously, or press and hold and simultaneously for longer than 2 seconds to return to Run mode fromanywhere in the top menu.3.1.1 Output OperationUse this menu to select the output operation mode. The default is light operate.• —Light operate. The output is on when the sensor detects a light state• —Dark operate. The output is on when the sensor detects a dark state3.1.2 TEACH MenuUse this menu to select the TEACH mode. The default is two-point static TEACH mode.• —Two-point static TEACH• —Dynamic TEACH• —Window set• —Light set• —Dark setAfter the TEACH mode is selected, from Run mode, press and hold TEACH for longer than 2 seconds to access the TEACHmode and teach the sensor. See TEACH Procedures on page 15 for additional information and remote input TEACHinstructions.When Window set, Light set, or Dark set are selected, the sensor returns to the Setup menu and the Offset Percentagemenu ( ) becomes available to set the offset percentage.3.1.3 Offset PercentageUse this menu to select the offset percentage when Window set, Light set, or Dark set TEACH modes are selected. Thedefault is 20% for Window and Light Set, and 50% for Dark Set.Window and Light Set options:Q3X Laser Contrast Sensorwww.bannerengineering.com - Tel: 763.544.3164 9