Barco R9001260 Owner's Manual

Barco R9001260 Owner's Manual Manual pdf 12 page image

3-2Location and Functions of Control5975967 BARCODATA 9200 220198- +- +- +- +- +097 8654321(17(532a3$86(- +3+$6()5((=7(;7(;,7$'-67%<6+$531(667,17&2/25%5,*+71(66&2175$67+(/3?COLORPHASESHARPN TINT BRIGHTNSTANDBYENTERTEXTEXITPAUSE &2175$67b. Remote controlThis remote control includes a battery powered infrared (IR) trans-mitter that allows the user to control the projector remotely.This remote control is used for source selection, control,adaptation and set up. It includes automatic storing of :- picture controls (Brightness, Sharpness...)- settingsOther functions of the remote control are :- switching between standby and operational mode.- switching to "pause" (blanked picture, full power for immediaterestarting)- direct access to all connected sources.- variable adjustment speed : when pushing continuously on thecontrol disc or the picture keys, the adjustment will be executedin an accelerated fashion.Remote Control (RCU)Local keypadTerminologyBARCO KeyADJ. : ADJUST key, to enter or exit the adjustment mode.Address key (recessed key), to enter the address of theprojector (between 0 and 9). Press the sunk address keywith a pencil, followed by pressing one digit button between0 and 9.STBY : stand-by button, to start projector when the powerswitch is switched on and to switch off the projectorwithout switching off the power switch.PAUSE : to stop projection for a short time, press 'PAUSE'.The image disappears but full power is retained for imme-diate restarting.Help : on line help information (not yet available)Digit buttons : direct input selection.Picture controls : use these buttons to obtain the desiredpicture analog level (see also 'Controlling').PHASE : used to remove the instability of the image.TEXT : when adjusting one of the image, e.g. controls duringa meeting, the displayed bar scale can be removed bypressing 'TEXT' key first. To re-display the bar scale on thescreen, press 'TEXT' key again. 'TEXT' key only active inoperational mode.12345678910FREEZ : press to freeze the projected image.ENTER : to start up the adjustment mode or to confirm anadjustment or selection in the adjustment mode.EXIT : to leave the adjustment mode or to scroll upwardswhen in the adjustment mode.Control disc Key (on RCU) or '+' and '-' keys (cursorkeys): to make menu selections when in the adjustmentmode.The control disc can move forward, backward, to the rightor to the left.Comparision between control disc movement and the use ofthe cursor keys on the local keypad :RCU = local keypadcontrol disc forward = '+' key upcontrol disc backward = '-' key downcontrol disc to the right = '+' key rightcontrol disc to the left = '-' key leftUse the '+' and '-' keys (cursor keys) : to increase ordecrease the analog level of the image controls when theyare first selected.RC operating indication : lights up when a button on theremote control is pressed. (This is a visual indicator to checkthe operation of the remote control)1112131415