Barco R9001260 Owner's Manual
                                                       | |
Contents
| 
Connections5-6 5975967 BARCODATA 9200 220198Straps on module level :Floating or non-floating input.R-Y : J3 : strap "yes" : non floating strap "no" : floatingY : J4 : strap "yes" : non floating strap "no" : floatingB-Y : J5 : strap "yes" : non floating strap "no" : floatingS : J6 : strap "yes" : non floating strap "no" : floatingFactory preset : strap "yes", non floating inputSync selection.J8 :strap "no" : separate syncstrap "yes" : sync on Y.J9 :strap "yes" : Tri-level syncstrap "no" : normal sync.Factory preset :separate sync andnormal sync.)ORDWLQJRUQRQIORDWLQJLQSXWFloatingNon-Floating6\QFVHOHFWLRQ6HSD UD WHV\QF 6\ QF RQ<----- -1 RUP DO6 \ QF 7ULOHYHO6\QF-- RGB3S/RG3sB Input Module.Connect your RGB signals with Tri-level sync, e.g. a professionalVCR to the RGB 3 level sync input module.RGB3S/RG3sB analog : 5 x BNCRed : 0.7 Vpp ± 3 dBBlue : 0.7 Vpp ± 3 dBGreen : 0.7 Vpp ± 3 dB1 Vpp ± 3 dB if Tri-level sync on greenVert. Tri-level sync : 1 Vpp to 4 Vpp ± 3 dBHor. Tri-level sync / Composite Tri-level sync:1 Vpp to 4 Vpp ± 3 dBAll input signals are always 75 ohm terminated, even in the "notselected" mode.Input Selection :RGB 3 -LEVEL SY NC I NPUTVert. 3 levelsyncBlueGreenRedHor. or composite3 level syncKey in the corresponding slot number on the RCU or the localkeypad.Indication on the Input Slot Menu :RGB3L-SS = RGB with separate Tri level sync.RGB3L-SOG = RGB with Tri level sync on green.HDTV VCRR G B V R G B H/ C VOn98 27910R G B H/ C VH9,'(2,13879,'(269,'(2RS 232 IN REMOTEPROJECTOR MODE :GREEN - OPERATIONRED- STANDBYCOMMUNICATIONPORT(800-PERIPHERALS)RS232 OUT IR-ACKNOWLEDGEDIR-RECEIVEDDIAGNOSTICSCODE IR-RECEIVER |
Related manuals for Barco R9001260
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine