Service Mode10-4 5975128 BARCODATA 8200 221297Select with orthen to return.Select with orthen to return.Select with orthen to return.Reset Lamp RuntimeReset lamp run time is only allowed when a new lamp is installed.Highlight Reset Lamp Run Time by pushing the control disc up or downand press ENTER to select.When Reset Lamp Run Time is selected in the Service Mode selectionmenu, the following warning will be displayed :Risk of electrical shock. Reset lamp run time is reserved to qualifiedservice personnel.If you are not qualified, press EXIT to cancel the reset operation.SERVICEIDENTIFICATIONCHANGE PASSWORDCHANGE LANGUAGERESET LAMP RUNTIMELAMP RUNTINE HISTORYLAMP POWER : NORMINALBARCO LOGOMOREWARNING-----------------------------------------------------RISK OFELECTRICAL SHOCK______________________________________________________________RESET LAMP RUN TIMEis reserved toqualifiedservice personnel to accept to return.Lamp Run Time HistoryTo get an overview of the different lamp run times, highlight Lamp RunTime History by pushing the control disc up or down and pressENTER.A listing with the lamp serial number and the corresponding run timewill be displayed.The actual installed lamp will be marked.Press EXIT to return to the service mode selection menu.SERVICEIDENTIFICATIONCHANGE PASSWORDCHANGE LANGUAGERESET LAMP RUNTIMELAMP RUNTINE HISTORYLAMP POWER : [NORMINAL]BARCO LOGOMORE...LAMP RUNTIME HISTORYSerial No Runtime-----------------------------------------------------> 0111121 600 h0110031 980 h0110010 1000 h0000000 00 h0000000 00 h0000000 00 h----------------------------------------------------- to returnSERVICEIDENTIFICATIONCHANGE PASSWORDCHANGE LANGUAGERESET LAMP RUNTIMELAMP RUNTINE HISTORYLAMP POWER [NORMINAL]BARCO LOGOMORE...Lamp Power ModeThe lamp can be driven in two different modes : NORMINAL or BOOST.Highlight Lamp Power by pushing the control disc up or down to selectthe Lamp Power.Press ENTER to toggle between NORMINAL and BOOST.
