13. Installation MenuImage 13-8 Image 13-913.4 OrientationWhat can be done?The way of physical installation of the projector can be defined to the projector.The following installation configurations are possible:• Front / table• Front / ceiling• Rear / table• Rear / ceilingHow to set Orientation?1. Press the MENU key to activate the Menu bar.2. Push the cursor key ← or → to highlight Installation in the menubar.3. Push the ↓ key to pull down the Installation menu.4. Push the cursor key ↑ or ↓ to highlight Orientation and press ENTER to select.The Orientation screen will be displayed.5. Push the cursor key ↑ or ↓ to highlight the desired orientation and press ENTER to confirm. (image 13-10)The projection is adapted and a bullet shows the active configuration.Image 13-1013.5 Color Wheel IndexC AUTION : Changing these settings may seriously affect the performance of the projector, return to the factorysetting by pressing Factory Preset CWI.What can be done?This adjustment has to be done by qualified service personnel when a new color wheel is installed.R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 199
