8. Geometry MenuImage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mage 8-385x5 H-side (Level 4) selections8.5.3.3 Adjusting the 5x5 H-side (Level 4)How to adjust the 5x5 H-side (Level 4)?1. Push the cursor key ↑ or ↓ to highlight the Pixels X edit box and press ENTER to select. (image 8-39)2. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values, e.g. to coarseshift the selected H-side in a horizontal way. Press ENTER to confirm. (image 8-40)3. Push the cursor key ↑ or ↓ to highlight the Pixels Y edit box and press ENTER to select.4. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values, e.g. to coarseshift the selected H-side in a vertical way (Follow this procedure in a similar way to adjust any desired H-side position). PressENTER to confirm. (image 8-41)5. Use the subpixel adjustments to fine shift the selected H-side.R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 91
