Barco REALITY 8200LC R9001218 Owner's Manual

Contents

Barco REALITY 8200LC R9001218 Owner's Manual Manual pdf 20 page image

5-6Connections5975848A BARCOREALITY 8200LC 271197R G B H / C VOn5*%$1$/2*,138798 27910)ORDWLQJRUQRQIORDWLQJLQSXWFloatingNon-Floating-6\QFVHOHFWLRQ6HSDUDWHV\QF 6\QFRQJUHHQ-----212))% +*59,13 ,13,1387$1$/2*,17(5)$&(0+]R G B V R G B H / C VOn98 27910R G B H / C VH9,'(2,13879,'(269,'(2RS 232 IN REMOTEPROJECTOR MODE :GREEN - OPERATIONRED- STANDBYCOMMUNICATION PORT(800-PERIPHERALS)RS232 OUTIR-ACKNOWLEDGEDIR-RECEIVEDDIAGNOSTICSCODE IR-RECEIVERVert. syncHor. sync or CompositesyncBlueGreenRedRGB Analog Input Module.RGB analog input terminals with separate Horizontal and Verticalsync inputs(RGB-HV), with Composite sync input(RGB-S) or withSync signals on green(RGsB).Always use an interface when a computer and local monitor haveto be connected to the projector. See 'slot 1' for interfaces to beapplied.RGBS/RGsB analog : 5 x BNCRed : 0.7 Vpp ± 3 dBBlue : 0.7 Vpp ± 3 dBGreen : 0.7 Vpp ± 3 dB1 Vpp ± 3 dB if sync on greenVert. sync : 1 Vpp to 4 Vpp ± 3 dBHor. sync / Composite sync :1 Vpp to 4 Vpp ± 3 dBAll input signals are always 75 ohm terminated, even in the "notselected" mode.RGB input selection :Key in the corresponding slot number on the RCU or the local keypad.Straps on module level :Floating or non-floating input.Red : J3 : strap "yes" : non floating strap "no" : floatingGreen : J4 : strap "yes" : non floating strap "no" : floatingBlue : J5 : strap "yes" : non floating strap "no" : floatingH/C : J6 : strap "yes" : non floating strap "no" : floatingV : J7 : strap "yes" : non floating strap "no" : floatingFactory preset : strap "yes", non floating inputSync selection : strap on module level.J8 : see drawingFactory preset : separate sync.Sync selection on the Input Slots menu.The horizontal sync input can be set as separate sync input or asseparate sync + video input. To change this setting, press ADJUSTor ENTER key to start up the Adjustment mode..