Barco REALITY 8200LC R9001218 Owner's Manual

Contents

Barco REALITY 8200LC R9001218 Owner's Manual Manual pdf 7 page image

1-1Unpacking and Dimensions5975848A BARCOREALITY 8200LC 27119711 2 3 4 5 3 7 9PullTo op en4 630135702 52,8978,41023,427,172,119541,5323284569UNPACKING AND DIMENSIONSUnpackingTo open the banding, pull on the clip as shown in the first drawing.Take the projector out of its shipping carton and place it on a table.For transportation, the projector is mounted on a wooden board with 3 bolts. Use a 13 mm wrench to remove these bolts.When using the projector as a table mounted configuration, always mount the 3 supporting feet (see drawing below). These feet are mountedon the same wooden board. Each foot contains one metal part and two plastic parts. To remove the feed, first turn out both plastic parts.To remove the metal parts from the board, remove the retaining bolts. Save these bolts because these bolts must be used to mount the feetto the projector. Mount first the metal parts with the removed bolts and turn in then both plastic parts to finish the feet.Warning : To prevent overheating of the projector as table mounted, always remove the wooden board and turn in the 3 supporting feetto allow air circulation via the built-in dust filter at the bottom.Save the original shipping carton and packing material, they will benecessary if you ever have to ship your projector. For maximumprotection, repack your projector as it was originally packed at thefactory.Contents of the complete unit (box) :Projector Dimensions(units : mm)25.4 mm = 1"- 1 BARCOREALITY 8200LC (weight ± 78 kg, 171,96lbs)- 1 remote control unit RCU + 9V battery- 1 power cable with outlet plug type ANSI 73.11.- 1 ownerís manual- 1 safety manual- 3 supporting feet (built up in 3 parts)