4. Setup4.8.2 Quick access keysWhat can be done ?The 3 function keys on top of the RCU can be associated with a particular item in one of the menus.Each function which is not password protected or does not have a key on the RCU can be associated to a function key.How to get an overview of the quick access keys ?1. Press MENU to activate the Tool bar2. Press → to select the Installation3. Press ↓ to Pull down the Installation menu4. Use ↑ or ↓ to select Quick access keys (image 4-15)5. Press ENTERA text box appears on the screen.Image 4-15How to program the quick access keys ?1. Scroll through the menus to the desired menu item2. Push the desired function key for 3 seconds (image 4-16)The menu item is stored in the quick access keyF 1 F 2 F 3M EN U B A C KImage 4-16Factory pre-programmed functions-F1 : color depth-F2 : noise reduction-F3 : orientation4.8.3 Automatic startupWhat can be done ?The automatic startup allows to bypass the standby state i.e. start up without going in standby state after switching on the projector.This means that the automatic startup allows immediate restart of the projector after a power failure (breakdown), i.e. without passingthrough the standby state, by recovering the previous settings (previous source,...).30 R5976837 BARCO ID R600/R600+ 21/09/2006
