6. AdvancedImage 6-26The aspect ratio settings are greyed out in case the Show native resolution or the Full screen representationsetting is enabled.How to set a custom Aspect ratio ?1. Press MENU to activate the Tool bar2. Press → to select Image3. Press ↓ to Pull down the Image menu4. Use ↑ or ↓ to select Aspect ratio5. Use → open the Aspect ratio menu6. Use ↑ or ↓ to select Custom7. Press ENTER to confirmA dialog box is displayed (image 6-27)8. Enter the values for width and height of the imageThe image aspect ratio is updated.Image 6-276.4.3 Show native resolutionReality(SXGA+)Native resolution of the LCD panels = 1400 x 1050 pixels (4:3)What can be done ?The aim here is to always show the resolution of the source independently of the resolution of the LCD panels. This way betterimage reproduction is obtained since no up or down scaling is done on the source.52 R5976837 BARCO ID R600/R600+ 21/09/2006
