Baroness SP05 Service Manual

Also see for SP05: Owner's operating manual Assembly and installation manual Assembly and installation manual Owner's operating manual

Baroness SP05 Service Manual Manual pdf 6 page image

Safety instructionSafety instructionsDangerDangerThis machine is designed to ensure safeoperation and has been tested and inspectedthoroughly before shipment from the factory.The machine is equipped with safety devices toprevent accidents. However, whether themachine demonstrates its original performancelevel depends on the manner in which it isoperated and handled, as well as the manner inwhich it is managed on a daily basis.Inappropriate use or management of themachine may result in injury or death. Observethe following safety instructions to ensure safeoperation.Before operating the machineBefore operating this machine, be sure toread the owner’s Manual and make sure thatyou understand its content thoroughly. Learnhow to operate each part and stop themachine in an emergency, and make surethat you are familiar with the safetyindications.If the operator cannot understand theOwner’s Manual, it is the owner’sresponsibility to thoroughly explain itscontent.Never allow children to operate or servicethe machine. Never allow adults that areunfamiliar with the instructions to operate orservice the machine. Follow the age limitspecified by the local government.Do not operate the machine under theinfluence of alcohol or drugs or if you arepregnant.Never operate the machine while people,especially children, or pets are nearby.Keep in mind that the owner, operator, andmechanic are responsible for preventingaccidents, and accidents can be preventedwith the cooperation of all.All operators and mechanics should receiveproper training. The owner is responsible forensuring that the operators receive training1.2.3.4.5.6.7.and the following must be thoroughlyunderstood:The basic safety precautions for operatinga ride-on bunker rake.Controlling the machine by applying thebrake when it begins to slide on a slope isdifficult.The main reasons why it may not bepossible to control the machine on a slopeare:Insufficient tire gripDriving too fastInadequate brake adjustmentThe use of a model that is unsuitable forthe jobLack of awareness of the groundconditions (bumpy, icy, muddy), inparticular, of the angle of gradientUse clothing that is suitable for the job. Wearequipment such as a helmet, protectiveglasses, protective footwear, long pants andearmuffs. Do not wear a towel around yourhead or waist, or a scarf around your neck.Make sure that the protection guard andcovers are properly installed andundamaged.The safety labels and operation labelsshould be preserved in their entirety. If theyare damaged, become dirty, or peel off,please replace them with new ones.Tighten any nuts, bolts, or screws thatbecome loose to ensure that the machine isalways operated under safe conditions.Before starting, thoroughly check that thearea where the machine is to be used is freeof dangerous objects that can be thrown bythe machine, such as rocks and wires.Repair any sensors that are malfunctioningbefore operating the machine.Check that the interlock system, safetyguards, and covers are installed correctlyand that they function properly. Repair theseparts if there is a malfunction beforeoperating the machine.If the brake operation is faulty or the parkingbrake lever has noticeable play, be sure toadjust or repair them before operating themachine.Do not use this machine if it has beenmodified.[1][2]-----8.9.10.11.12.13.14.15.16.SafetyPage 1-2 Safety instruction