Bartscher FAE92M00 Installation, Operating And Maintenance Instructions

Contents

Bartscher FAE92M00 Installation, Operating And Maintenance Instructions Manual pdf 17 page image

15ENGLISHGB9.2. Replacement of nozzle and adjustment of gas burner primary air supplyFollow the instructions below. Close the gas cut-off valve. Remove the gas burners grates (A). Remove the flame distributor (B) andburner body (C). Remove the recesses (D). Loosen the screw E and set the Venturi pipe(F). When required, replace the nozzle (G) with anozzle intended for used gas (seeappendices). Tighten the screw E and restore the initialsettings.9.3. Replacement of gas burner ignition flame nozzleFollow the instructions below. Close the gas cut-off valve. Remove the gas burners grates (A). Remove the flame distributors (B)and burners bodies (C). Remove the recesses (D). Replace the gas burner ignition flamenozzles (E). Restore the initial settings.EBCADHEFBCADGID 06 ID 15