Bartscher FAE92M00 Installation, Operating And Maintenance Instructions

Contents

Bartscher FAE92M00 Installation, Operating And Maintenance Instructions Manual pdf 9 page image

7ENGLISHGB5.2. Ignition of gas burnersIGNITIONA) Press the control knob of selected burner androtate anti-clockwise to ignite the ignition flame(position 1). Ignite the ignition flame with useof match.B) Hold the control knob pressed for approx. 10seconds in order to heat up the thermalelement; then release the controller.C) To ignite the burner rotate the control knob anti-clockwise (position 2).D) Set the gas burner power (position 3).SWITCHING OFFA) To switch off the burner rotate the control knobclockwise (position 1).B) To put out the ignition flame rotate the controlknob clockwise (position 0).5.3. Oven switching on and offA) Start the automatic switch-off to turn on theelectrical connection.B) Turn the oven switch A to activate the ovenheating elements. The green control light (L)will come on.C) Turn the oven temperature controller and set itbetween 70°C and 300°C.When the heating coils are activated, the whiteindicator light (W) will come on.When the oven reaches required temperaturethe white indicator light goes off.D) Turn the oven switch (A) to activate ordeactivate the upper, lower, or bothheating elements.E) To switch the oven off turn the switch (A)to position 0. Then turn the thermostatcontroller (B) to position 0.F) In case of failure the red indicator lightcomes on.Temperature °C 70 100 130 160 200 240 270 300Time in minutes 1’ 30” 3’ 4’ 30’ 6’ 8’ 11’ 14’ 17’Pos 0 Pos 1A BPos 1Pos 0WPos. 1 Pos. 2 Pos. 3Pos. 0 ID 04L