Bartscher FAE92M00 Installation, Operating And Maintenance Instructions

Contents

Bartscher FAE92M00 Installation, Operating And Maintenance Instructions Manual pdf 5 page image

3ENGLISHGB3. SAFETY Read carefully the guidelines andinstructions in the instruction manualbefore you use the appliance.The instruction manual contains generalinformation on how to safely use and maintain theappliance.Retain the manual for future reference.The manufacturer took extra care when designingand manufacturing to prevent any safety or healthhazard to the personnel operating the appliance.Please read carefully the guidelines in theinstruction manual and instructions placed directlyonto the appliance. Above all, observe all thesafety instructions.Do not intervene in or remove the protectiveappliances installed in the appliance. Non-compliance may lead to severe safety and healthhazard against people. We recommend to performa few tests to know the layout and main functionsof the control panel, particularly those to switchthe appliance on and off.The appliance is intended only for the use it hasbeen designed for and any other use isconsidered as the use not in compliance with theintended use.The manufacturer is not liable for materialdamage or damage to person caused bymisapplication or incorrect application of theappliance.Any maintenance work that requires specialtechnical licence or special skills may beperformed by qualified personnel only.To provide hygiene and protect foods from dirt, allthe elements that have direct or indirect contactwith the foods and all border areas must bethoroughly cleaned. Use only the cleaning agentsintended for use in contact with food and avoidusing flammable agents or harmful to health.After each use of the appliancemake sure that all the heatingelements and control elements havebeen switched off and the power andgas supply connections aredisconnected. The device requires some safety measuresduring installation, positioning, fixing, and connectingto the power supply (section 8 “INSTALLATION”). In case of longer standstill disconnect allpower supply cables and thoroughly clean theinside and outside elements of the device (section6 “CLEANING AND MAINTENANCE”). Do not clean the device with directstream of water.