AW00136902000 FeaturesBasler dart BCON 10511.9 Reverse X and Reverse YThe camera’s Reverse X and Reverse Y features let you flip the captured images horizontally and/or vertically before they are transmitted from the camera.Reverse X and Reverse Y can be enabled at the same time. This effectively rotates the image by180 degrees.11.9.1 Reverse XThe Reverse X feature is a horizontal mirror image feature. When Reverse X is enabled, the pixelvalues for each line in a captured image will be swapped end-for-end about the line’s center. Thismeans that for each line, the value of the first pixel in the line will be swapped with the value of thelast pixel, the value of the second pixel in the line will be swapped with the value of the next-to-lastpixel, and so on.Figure 47 shows a normal image on the left and an image captured with reverse X enabled on theright.If you are using dart model daA1600-60uc or daA2500-14uc, the effective Bayercolor pixel alignment will change from GB to BG if you enable reverse X.For more information about color pixel alignments, see Section 11.6 on page 89.Fig. 47: Reverse X Mirror ImagingNormal Image Mirror Image
