Technical Specifications and Requirements AW0013690200012 Basler dart BCON3.3.2 Color Camera Spectral ResponseThe following graphs show the spectral response for each available color camera model.The spectral response curves exclude lens characteristics, light sourcecharacteristics, and IR cut filter characteristics.To obtain best performance from color models of the camera, we recommendusing a dielectric IR cut filter. The filter should transmit in a range from 400 nm to700 ... 720 nm, and it should cut off from 700 ... 720 nm to 1100 nm.If you are using a dart bare board color camera, we recommend installing an IR cut filter or alens with an integrated IR cut filter when integrating the camera into thesystem. dart S-mount color camera, we recommend attaching a lens with anintegrated IR cut filter to the camera. dart CS-mount color camera, a suitable IR cut filter is already built into thelens adapter. For more information, see Section 4.6 on page 30.Wavelength (nm)Quantum Efficiency (%)BlueGreenRedFig. 5: daA1280-54bc Spectral Response (From Sensor Data Sheet)
