Technical Specifications and Requirements AW001369020006 Basler dart BCON3 Technical Specifications andRequirementsThis chapter lists the camera models covered by the manual. It provides the general specificationsfor these models and the basic requirements for using them.3.1 ModelsThe current Basler dart BCON camera models are listed in the top row of the specification tableson the next pages of this manual. The camera models are differentiated by their resolution, theirmaximum frame rate at full resolution, and whether the camera’s sensor is mono or color.All dart BCON camera models are available in three variants: Bare board: This variant consists of a circuit board only. S-mount: This variant consists of a circuit board with a camera front attached. S-mount lensescan be attached to the lens mount on the camera front. CS-mount: This variant consists of a circuit board with a camera front attached. CS-mountlenses can be attached to the lens mount on the camera front.Unless otherwise noted, the material in this manual applies to all of the camera models listed in thetables. Material that only applies to a particular camera model, to a subset of models, or a variant,will be so designated.The dart S-mount color cameras are not equipped with an IR cut filter. If you wantto operate a dart S-mount color camera with an IR cut filter, you must attach alens with an integrated IR cut filter to the camera.dartCS-mount (*)dartbare boarddartS-mountFig. 1: dart BCON Variants(*) CS-mount color camerasare equipped with an IR cut filter.
