Software and Hardware Installation34 Basler pioneer2.2.5.3 Unbinding the Basler Filter Driver from a Non-compatible GigEor a Fast Ethernet Network AdapterDuring installation of the Basler pylon SDK or the Basler pylon Viewer, the current network adapter-driver associations will be changed for all network drivers installed in your PC with Basler driversreplacing the current drivers.Your application may require that no Basler network driver is bound to an adapter that is not usedfor a camera.As an example, the following procedures describe how to unbind the Basler filter driver from a FastEthernet (or non-compatible GigE) network adapter:1. Open a Network Connections window. Make sure that the window is set to display details (rightclick within the window, select View, and select Details).2. Find the entry for the network adapter from which you want to unbind the Basler network driver.3. Right click on the name of the network adapter.4. Select Properties from the drop down menu. A LAN Connection Properties window for theadapter will open.5. Look for the list box in the middle of the window that is labelled This connection uses thefollowing items.6. In the list, find the entry for Pylon GigE Vision Streaming Filter and uncheck the entry.7. Click the OK button.8. The driver will be unbound and the Properties window will close.The Basler network driver is unbound.NoteYou could completely uninstall the Basler network driver by clicking on its entryin the list and then clicking the Uninstall button. Be aware that doing so willremove the Basler network driver from all network adapters
