General Configuration Screen6H122-08 User’s Guide5-473. Press ENTER. If the TFTP gateway IP address entered is a validformat, the cursor returns to the beginning of the TFTP Gateway IPAddress field. If the entry is not valid, the Event Message Linedisplays “INVALID TFTP GATEWAY IP ADDRESS OR FORMATENTERED”. Local Management does not alter the current value, butit does refresh the TFTP Gateway IP Address field with the previousvalue.4. Use the arrow keys to highlight the SAVE command.5. Press ENTER. The Event Message Line at the top of the screendisplays “SAVED OK”.5.15.5 Setting the Module DateThe modules are year 2000 compliant, so the module date may be setbeyond the year 1999. To set the module date, perform the followingsteps:1. Use the arrow keys to highlight the Module Date field.2. Enter the date in an MM/DD/YYYY format.3. Press ENTER to set the system calendar to the date in the input field.4. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press ENTER.If the date entered is a valid format, the Event Message Line at the top ofthe screen displays “SAVED OK”. If the entry is not valid, LocalManagement does not alter the current value, but it does refresh theModule Date field with the previous value.NOTEIf the 6C105 chassis has been assigned a chassis date, it is notnecessary to assign a module date to the 6H122-08. Allinstalled modules recognize the chassis date of the 6C105.NOTEIt is not necessary to add separators between month, day, andyear numbers. For example, to set the date to 03/17/1997, type“03171997” in the Module Date field.
