Cabletron Systems SEHI-22/24 User Manual

Also see for SPECTRUM: User guide User guide User guide User guide User guide

Contents

2-1Chapter 2Using the SEHI Hub ViewNavigating through the Hub View, monitoring hub performance; managing the hubThe heart of the SPECTRUM Portable Management Application (SPMA) for theSEHI is the Hub View, a graphical interface that gives you access to many of thefunctions that provide control over the device.Using the Hub ViewThere are two ways to open the Hub View: if you are working within a networkmanagement system, you can select the Hub View option from the icon menu;specific directions for creating a SEHI icon and accessing the icon menu can befound in the appropriate Installing and Using SPECTRUM for... guide. If you arerunning the SEHI module in a stand-alone mode, type the following at thecommand line:spmarun hubstack The community name you use to start the module must have at least Read access;for full management functionality, you should use a community name thatprovides Read/Write or Superuser access. For more information on communitynames, consult the appropriate Installing and Using SPECTRUM for... guide,and/or the Community Names chapter in the SPMA Tools Guide.NOTEThe spmarun script invoked first in the above command temporarily sets the environmentvariables SPMA needs to operate; be sure to use this command any time you launch anapplication from the command line. This script is automatically invoked when you launchan application from the icon menu or from within the Hub View.If there is a hostname mapped to your SEHI’s IP address, you can use inplace of to launch the Hub View. Please note, however, that the hostname isnot the same as the device name which can be assigned via Local Management and/orSPMA; you cannot use the device name in place of the IP address.