Cabletron Systems SEHI-22/24 User Manual

Also see for SPECTRUM: User guide User guide User guide User guide User guide

Contents

Repeater Redundancy4-2Setting Network Circuit Redundancyspmarun r4red The main Repeater Redundancy window, Figure 4-1, will appear.Figure 4-1. The Repeater Redundancy WindowConfiguring a Redundant CircuitTo establish or edit a redundant circuit:1. In the Repeater Redundancy window, click mouse button 1 on the repeaterinterface for which you would like to edit or establish a redundant circuit, thenclick . The Channel X Redundancy window, Figure 4-2, willappear.NOTESThe spmarun script invoked first in the above command temporarily sets the environmentvariables SPMA needs to operate; be sure to use this command any time you launch anapplication from the command line. The script is automatically invoked when you launchthe application from the icon menu or from within the Hub View.If you wish to change any redundancy settings, be sure to use a community name with atleast Read/Write access. If you only wish to view current settings, a community namewith Read access will be sufficient.If there is a hostname mapped to your SEHI’s IP address, you can use inplace of to launch this application. Please note, however, that the hostnameis not the same as the device name which can be assigned via Local Management and/orSPMA; you cannot use the device name in place of the IP address.