Cabletron Systems Spectrum 2E42-27 Management Manual

Also see for SmartSwitch 8H02-16: User guide

Contents

Interface Device ViewInterface IconDevice Views Fast Ethernet SmartSwitch Module2-4 Management Module GuideInterface Icon Subviews MenuTable 2-1 describes the Interface icon device-specific subviews menuselections. For information on accessing device-specific subviews menus, seeChapter 1, Introduction.Interface LabelThis label displays the interface (port) number.Administrative Status LabelThis label displays the status of this interface. Double-click this label to openthe Port Configuration - CSIIfPort view described in Chapter 3, ConfigurationViews. Table 2-2 and Table 2-3 list the possible states relative to theapplication selected (Physical or Bridging). The default application for thisview is Physical (MIB-II). To select the application to be displayed, click theFilter menu button in the Interface Options panel. (Refer to the InterfaceOptions Panel description later in this chapter for more information on theFilter menu button.)Table 2-1. Interface Icon Subviews MenuMenu Selection DescriptionConfiguration Opens the Device Configuration view describedin Chapter 3, Configuration View.Model Information Opens the Model Information view described inthe Operator’s Reference.Table 2-2. Administrative Status for the Physical or MIB II ApplicationColor Status DescriptionGreen ON Port is operational.Blue OFF Port is off.Yellow TST Port is in the test mode.