Cabletron Systems Spectrum 2E42-27 Management Manual

Also see for SmartSwitch 8H02-16: User guide

Contents

9032073 E2 Application Views5-11FDDI FNB ApplicationFDDI FNB ApplicationThis section describes the FDDI FNB application supported by this device.The name of the model type used to model the application is FddiMAC. Thisapplication is available when the appropriate High Speed Interface Module(HSIM) is installed.Table 5-4 lists the application-specific subviews available from the IconSubviews menu for the FDDI FNB application.FDDI Station List ViewThis view displays information about the devices connected to the FDDI ringand provides the following functionality and information.This button updates the contents of the Station Table.This button controls which type of address is shown in the Station List. Ittoggles between MAC (Physical) and Canonical (Ethernet) and displays theformat not currently selected.Set Filter Opens the Filter Dialog box for the selected column of the Stationtable. Type a character string to search the column.Clear Filter returns the Station table to its normal state.Table 5-4. FDDI FNB Application Subviews menuMenu Selection DescriptionDevTop Opens the Device Topology view described in the Operator’sReference.Station List Opens the FDDI Station List view described below.Acknowledge Allows you to acknowledge an alarm condition.Configuration Opens the Device Configuration view described in Chapter 3,Configuration Views.Model Information Opens the Model Information view described in theOperator’s Reference.UpdateMAC/CanonicalSet Filter/Clear Filter