Black plate (8,1)Cadillac DTS Owner Manual - 2011Memory FeaturesOn vehicles with the memory feature, the controls onthe driver door are used to program and recall memorysettings for the driver seat, outside mirrors, and thesteering wheel position, if the vehicle has the power tiltwheel and telescopic steering feature.Storing Memory PositionsTo save into memory:1. Adjust the driver seat, including the seatbackrecliner and lumbar, both outside mirrors, and thesteering column.2. Press and hold “1” until two beeps sound.3. Repeat for a second driver position using “2.”To recall, press and release “1” or “2.” The vehicle mustbe in P (Park). A single beep will sound. The seat,outside mirrors, and steering column will move to theposition previously stored for the identified driver.See Memory Seat, Mirrors and Steering Wheel onpage 2‑6 for more information.Easy Exit Driver SeatThis feature can move the seat rearward and the powersteering tilt wheel, if equipped, up and forward to allowextra room to exit the vehicle.S : Press to recall the easy exit seat position. Thevehicle must be in P (Park).A single beep sounds. The driver seat will move back,and if the vehicle has the power steering column andtelescopic steering feature, the steering column willmove up and forward.See Memory Seat, Mirrors and Steering Wheel onpage 2‑6 and “Easy Exit Recall” and “Easy Exit Setup”under DIC Vehicle Customization on page 4‑74 formore information.1-8