Cadillac 2011 Cadillac DTS Owner's Manual

Also see for 2011 Cadillac DTS: Navigation manual Owner's manual Specifications Brochure Owner's manual

Contents

Black plate (78,1)Cadillac DTS Owner Manual - 2011DELAY DOOR LOCKThis feature allows you to select whether or not thelocking of the vehicle's doors will be delayed. Whenlocking the doors with the power door lock switch and adoor is open, this feature will delay locking the doorsuntil five seconds after the last door is closed. You willhear three chimes to signal that the delayed lockingfeature is in use. The key must be out of the ignition forthis feature to work. You can temporarily overridedelayed locking by pressing the power door lock switchtwice or the lock button on the RKE transmitter twice.Press the customization button until DELAY DOORLOCK appears on the DIC display. Press the set/resetbutton once to access the settings for this feature. Thenpress the menu up/down button to scroll through thefollowing settings:OFF: There will be no delayed locking of the vehicle'sdoors.ON (default): The doors will not lock until five secondsafter the last door is closed.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.EXIT LIGHTINGThis feature allows you to select the amount of time youwant the exterior lamps to remain on when it is darkenough outside. This happens after the key is turnedfrom ON/RUN to LOCK/OFF.Press the customization button until EXIT LIGHTINGappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Then pressthe menu up/down button to scroll through the followingsettings:OFF: The exterior lamps will not turn on.30 SECONDS (default): The exterior lamps will stay onfor 30 seconds.1 MINUTE: The exterior lamps will stay on forone minute.2 MINUTES: The exterior lamps will stay on fortwo minutes.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.4-78