Black plate (37,1)Cadillac DTS Owner Manual - 2011Mirror Adjustment1. Press (C) to unfold the mirrors out to the drivingposition.2. Press (D) to fold the mirrors toward the vehicle.Resetting the Power Foldaway MirrorsReset the power foldaway mirrors if:. The mirrors are accidentally obstructed whilefolding.. They are accidentally manually folded/unfolded.. The mirrors do not stay in the unfolded position.. The mirrors vibrate at normal driving speeds.Fold and unfold the mirrors one time using the mirrorcontrols to reset them to their normal position. A noisemay be heard during the resetting of the powerfoldaway mirrors. This sound is normal after a manualfolding operation.Turn Signal Indicator (If Equipped)The vehicle may have a turn signal indicator lamp thatis built into the mirror. The turn signal lamp flashes withthe use of the vehicle's turn signal and hazard flashers.Outside Automatic Dimming MirrorIf the vehicle has this feature, the driver side mirroradjusts for the glare of headlamps behind you. Thisfeature is controlled by the on and off settings on theautomatic dimming rearview mirror.Side Blind Zone Alert (SBZA)If the vehicle has the Side Blind Zone Alert (SBZA)system, see Side Blind Zone Alert (SBZA) onpage 3‑42 for more information.Park Tilt MirrorsIf your vehicle is equipped with memory mirrors, it iscapable of performing the park tilt mirror feature. Thisfeature allows the driver and passenger side mirror totilt to a factory programmed position when the vehicle isin R (Reverse). This feature may be useful in allowingyou to view the curb when you are parallel parking.When the vehicle is shifted out of R (Reverse) andeither a five-second delay has occurred, or the ignitionis turned to LOCK/OFF, the driver and passenger sidemirror will return to its original position.This feature can be enabled/disabled through theDriver Information Center (DIC). See DIC VehicleCustomization on page 4‑77 for more information.3-37