Black plate (8,1)Cadillac Escalade/Escalade ESV Owner Manual - 20116-8 LightingThe headlamps will also stayon after you exit the vehicle.This feature can be programmedusing the Driver Information Center(DIC). See Vehicle Personalizationon page 5‑40.The regular headlamp system canbe turned on when needed.Hazard Warning Flashers| (Hazard Warning Flashers):Press this button located on top ofthe steering column, to make thefront and rear turn signal lampsflash on and off. This warns othersthat you are having trouble. Pressagain to turn the flashers off.When the hazard warning flashersare on, the vehicle's turn signals willnot work.Turn and Lane-ChangeSignalsAn arrow on the instrument panelcluster flashes in the direction of theturn or lane change.Move the lever all the way up ordown to signal a turn.Raise or lower the lever for lessthan one second until the arrowstarts to flash to signal a lanechange. This causes the turnsignals to automatically flashthree times. It will flash six timesif tow-haul mode is active. Holdingthe turn signal lever for more thanone second will cause the turnsignals to flash until you releasethe lever.The lever returns to its startingposition whenever it is released.If after signaling a turn or a lanechange the arrows flash rapidly ordo not come on, a signal bulb couldbe burned out.Have the bulbs replaced. If the bulbis not burned out, check the fuse.See Fuses and Circuit Breakers onpage 10‑42.
