Black plate (35,1)Cadillac Escalade EXT Owner Manual - 2012Vehicle Care 10-356. Press a new bulb into the bulbsocket.7. Reinstall the socket into thetaillamp assembly by turning thebulb socket clockwise until itclicks.8. Reinstall the taillamp assemblymaking sure to line up the pinswith the vehicle and tighten thescrews.License Plate LampTo replace one of these bulbs:1. Reach under the rear bumper forthe bulb socket. Turn the bulbsocket counterclockwise and pullthe bulb socket out of the lampassembly.2. Pull the bulb straight out of thesocket.3. Install the new bulb into thesocket.4. Reinstall the bulb socket byturning it clockwise into the lampassembly.Replacement BulbsExterior Lamp BulbNumberBack-up Lamp 7441LicensePlate Lamp 168Sidemarker Lamp 194LLStoplamp/Taillamp/Turn Signal Lamp 3057KFor replacement bulbs not listedhere, contact your dealer.Electrical SystemElectrical SystemOverloadThe vehicle has fuses and circuitbreakers to protect against anelectrical system overload.When the current electrical load istoo heavy, the circuit breaker opensand closes, protecting the circuituntil the current load returns tonormal or the problem is fixed. Thisgreatly reduces the chance of circuitoverload and fire caused byelectrical problems.Fuses and circuit breakers protectpower devices in the vehicle.Replace a bad fuse with a new oneof the identical size and rating.If there is a problem on the road anda fuse needs to be replaced, thesame amperage fuse can beborrowed. Choose some feature ofthe vehicle that is not needed to useand replace it as soon as possible.InformationProvidedby:
