Black plate (18,1)Cadillac ATS Owner Manual - 2013 - crc - 6/5/129-18 Driving and OperatingThe instruments and audio systemswill operate as they do in ON/RUN,but the vehicle will not be able to bedriven. The engine will not start inService Only Mode. Push the buttonagain to turn the vehicle off.Starting the EnginePlace the transmission in theproper gear.Automatic TransmissionMove the shift lever to P (Park) orN (Neutral). The engine will not startin any other position. To restart thevehicle when it is already moving,use N (Neutral) only.Notice: Do not try to shift toP (Park) if the vehicle is moving.If you do, you could damage thetransmission. Shift to P (Park)only when the vehicle is stopped.Notice: If you add electrical partsor accessories, you could changethe way the engine operates. Anyresulting damage would not becovered by the vehicle warranty.See Add-On Electrical Equipmenton page 9‑72.Manual TransmissionThe shift lever should be in Neutraland the parking brake engaged.Hold the clutch pedal down to thefloor and start the engine. Thevehicle will not start if the clutchpedal is not all the way down.Starting Procedure (KeylessAccess)1. If the vehicle has the keylessaccess system, the transmittermust be in the vehicle. Put yourfoot on the brake pedal andpush the START/STOP button.When the engine beginscranking, let go of the button.The idle speed will go down asthe engine gets warm. Do notrace the engine immediatelyafter starting it. Operate theengine and transmission gentlyto allow the oil to warm up andlubricate all moving parts.If the transmitter is not in thevehicle or something isinterfering with the transmitter,the Driver Information Center(DIC) will display a message.See Remote Keyless Entry(RKE) System Operation onpage 2‑3 and Key and LockMessages on page 5‑34.InformationProvidedby:
