Black plate (4,1)Cadillac ATS Owner Manual - 2013 - CRC - 10/5/125-4 Instruments and ControlsHornPress a on the steering wheel padto sound the horn.Windshield Wiper/WasherWith the ignition in ACC/ACCESSORY or ON/RUN/START,move the windshield wiper lever toselect the wiper speed.HI: Use for fast wipes.LO: Use for slow wipes.INT: (Intermittent Wipes): Movethe lever up to INT for intermittentwipes, then turn the x INT bandup for more frequent wipes or downfor less frequent wipes.OFF: Use to turn the wipers off.8 (Mist): For a single wipe, brieflymove the wiper lever down. Forseveral wipes, hold the wiperlever down.Clear snow and ice from the wiperblades and windshield before usingthem. If frozen to the windshield,carefully loosen or thaw them.Damaged blades should bereplaced. See Wiper BladeReplacement on page 10‑30.Heavy snow or ice can overload thewiper motor.Wiper ParkingIf the ignition is put in OFF while thewipers are on LO, HI, or INT, theywill immediately stop.If the windshield wiper lever is thenmoved to OFF before the driverdoor is opened or within 10 minutes,the wipers will restart and move tothe base of the windshield.If the ignition is put in OFF while thewipers are performing wipes due towindshield washing, the wiperscontinue to run until they reach thebase of the windshield.Rainsense™For vehicles with Rainsense, asensor near the top center of thewindshield detects the amount ofwater on the windshield andcontrols the frequency of thewindshield wiper.Keep this area of the windshieldclear of debris to allow for bestsystem performance.
