Black plate (34,1)Cadillac Escalade Owner Manual (GMNA-Localizing-Europe-7132796) -2014 - CRC - 7/12/135-34 Instruments and ControlsSTABILITRAK OFF may alsodisplay when the stability controlhas been automatically disabled.There are several conditions thatcan cause this message to appear.. One condition is overheating,which could occur if StabiliTrakactivates continuously for anextended period of time.. The message also displays if thebrake system warning light is on.See Brake System WarningLight on page 5-17.. The message could display if thestability system takes longerthan usual to complete itsdiagnostic checks due to drivingconditions.. The message displays if anengine or vehicle relatedproblem has been detected andthe vehicle needs service. Seeyour dealer.The message turns off as soon asthe conditions that caused themessage to be displayed are nolonger present.Airbag System MessagesSERVICE AIR BAGThis message displays if there is aproblem with the airbag system.Have your dealer inspect thesystem for problems. See AirbagReadiness Light on page 5-13 andAirbag System on page 3-23 formore information.Security MessagesSERVICE THEFT DETERRENTSYSTEMThis message displays when thereis a problem with the theft-deterrentsystem. The vehicle may or may notrestart so you may want to take thevehicle to your dealer before turningoff the engine. See ImmobiliserOperation on page 2-13 for moreinformation.Tyre MessagesSERVICE TIRE MONITORSYSTEMOn vehicles with the Tyre PressureMonitor System (TPMS), thismessage displays if a part on theTPMS is not working properly. Thetyre pressure light also flashes andthen remains on during the sameignition cycle. See Tyre PressureLight on page 5-20. Severalconditions may cause this messageto appear. See Tyre PressureMonitor Operation on page 10-45 formore information. If the warningcomes on and stays on, there maybe a problem with the TPMS. Seeyour dealer.
