Black plate (55,1)Cadillac Escalade/Escalade ESV Owner Manual - 2011Instruments and Controls 5-556. Press and hold the buttonthat will be used to control thegarage door until the garagedoor moves. The indicatorlight above the selected buttonshould slowly blink. This buttonmay need to be held for up to55 seconds.7. Immediately release the buttonwhen the garage door moves.The indicator light will blinkrapidly until programming iscomplete.8. Press and release the samebutton again. The garage doorshould move, confirming thatprogramming is successful andcomplete.To program another Fixed Codedevice such as an additional garagedoor opener, a security device,or home automation device, repeatSteps 1-8, choosing a differentbutton in Step 6 than what wasused for the garage door opener.Universal Remote SystemOperationPress and hold the appropriatebutton for at least half of a second.The indicator light will come onwhile the signal is being transmitted.Reprogramming UniversalHome Remote ButtonsAny of the three buttons can bereprogrammed by repeating theinstructions.Erasing Universal HomeRemote ButtonsThe programmed buttons should beerased when the vehicle is sold orthe lease ends.To erase either Rolling Code orFixed Code settings on theUniversal Home Remote device:1. Press and hold the two outsidebuttons at the same time forapproximately 20 seconds, untilthe indicator lights, locateddirectly above the buttons, beginto blink rapidly.2. Once the indicator lights begin toblink, release both buttons. Thecodes from all buttons will beerased.For help or information on theUniversal Home Remote System,call the customer assistance phonenumber under Customer AssistanceOffices (U.S. and Canada) onpage 13‑5 or Customer AssistanceOffices (Mexico) on page 13‑5.
