Cadillac SRX Owner's Manual

Also see for 2011 SRX CROSSOVER: Owner's manual Owner's manual Owner's manual Brochure Brochure

Contents

Cadillac SRX Owner's Manual Manual pdf 172 page image

Black plate (48,1)Cadillac SRX Owner Manual - 2013 - CRC - 11/9/125-48 Instruments and Controls6. Immediately return to thevehicle. Firmly press and holdfor two seconds the UniversalRemote system button, selectedin Step 2 to control the garagedoor, and then release it. If thegarage door does not move orthe lamp on the garage dooropener receiver (motor-headunit) does not flash, press andhold the same button a secondtime for two seconds, thenrelease it. Again, if the doordoes not move or the garagedoor lamp does not flash, pressand hold the same button a thirdtime for two seconds, thenrelease.The Universal Remote systemshould now activate thegarage door.To program the remaining twoUniversal Remote system buttons,begin with Step 1 of “Programmingthe Universal Remote System.”Gate Operator and CanadianProgrammingIf you have questions or need helpprogramming the Universal Remotesystem, call 1-800-355-3515 or goto www.homelink.com.Canadian radio-frequency lawsrequire transmitter signals to timeout or quit after several seconds oftransmission. This may not be longenough for the Universal Remotesystem to pick up the signal duringprogramming. Similarly, some U.S.gate operators are manufactured totime out in the same manner.If you live in Canada, or you arehaving difficulty programming a gateoperator or garage door opener byusing the “Programming theUniversal Remote System”procedures, regardless of whereyou live, replace Step 2 under“Programming the Universal RemoteSystem” with the following:Continue to press and hold theUniversal Remote system buttonwhile you press and release everytwo seconds (cycle) the hand-heldtransmitter button until thefrequency signal has beensuccessfully accepted by theUniversal Remote system. TheUniversal Remote system indicatorlight will flash slowly at first and thenrapidly. Proceed with Step 3 under“Programming the Universal RemoteSystem” to complete.Universal Remote SystemOperationUsing the Universal RemoteSystemPress and hold the appropriateUniversal Remote system button forat least half of a second. Theindicator light will come on while thesignal is being transmitted.Erasing Universal RemoteSystem ButtonsAll programmed buttons should beerased when the vehicle is sold orthe lease ends.