Black plate (23,1)Cadillac SRX Owner Manual - 2013 - CRC - 11/9/12Driving and Operating 9-23AutomaticTransmissionThere are several different positionsfor the shift lever.P (Park): This position locks thefront wheels. It is the best positionto use when you start the enginebecause the vehicle cannot moveeasily.{ WARNINGIt is dangerous to get out of thevehicle if the shift lever is not fullyin P (Park) with the parking brakefirmly set. The vehicle can roll.Do not leave the vehicle when theengine is running. If you have leftthe engine running, the vehiclecan move suddenly. You or otherscould be injured. To be sure thevehicle will not move, even whenyou are on fairly level ground,always set the parking brake andmove the shift lever to P (Park).See Shifting Into Park onpage 9‑20 and DrivingCharacteristics and Towing Tipson page 9‑65.Make sure the shift lever is fully inP (Park) before starting the engine.The vehicle has an automatictransmission shift lock controlsystem. You must fully apply theregular brakes first and then pressthe shift lever button before you canshift from P (Park) when the ignitionis in ON/RUN. If you cannot shift outof P (Park), ease pressure on theshift lever and push the shift leverall the way into P (Park) as youmaintain brake application. Thenpress the shift lever button andmove the shift lever into anothergear. See Shifting out of Park onpage 9‑21.Notice: Shifting to R (Reverse)while the vehicle is movingforward could damage thetransmission. The repairs wouldnot be covered by the vehiclewarranty. Shift to R (Reverse) onlyafter the vehicle is stopped.R (Reverse): Use this gear toback up.
