Black plate (24,1)Cadillac SRX Owner Manual - 2013 - CRC - 11/9/129-24 Driving and OperatingAt low vehicle speeds, R (Reverse)can be used to rock the vehicleback and forth to get out of snow,ice, or sand without damaging yourtransmission. See If the Vehicle IsStuck on page 9‑9 for additionalinformation.N (Neutral): In this position, theengine does not connect with thewheels. To restart when the vehicleis already moving, use N (Neutral)only. You can also use N (Neutral)when the vehicle is being towed.{ WARNINGShifting into a drive gear while theengine is running at high speed isdangerous. Unless your foot isfirmly on the brake pedal, thevehicle could move very rapidly.You could lose control and hitpeople or objects. Do not shiftinto a drive gear while the engineis running at high speed.Notice: Shifting out of P (Park) orN (Neutral) with the enginerunning at high speed maydamage the transmission. Therepairs would not be covered bythe vehicle warranty. Be sure theengine is not running at highspeed when shifting the vehicle.D (Drive): This position is fornormal driving. It provides the bestfuel economy. If you need morepower for passing, and you are:. Going less than 35 mph(55 km/h), push the acceleratorpedal about halfway down.. Going about 35 mph (55 km/h)or more, push the accelerator allthe way down.The transmission will shift downto a lower gear and have morepower.Downshifting the transmission inslippery road conditions could resultin skidding, see “Skidding” underLoss of Control on page 9‑5Notice: Spinning the tires orholding the vehicle in one placeon a hill using only theaccelerator pedal may damagethe transmission. If you are stuck,do not spin the tires. Whenstopping on a hill, use the brakesto hold the vehicle in place.Manual ModeDriver Shift Control (DSC)Notice: Driving with the engine ata high rpm without upshiftingwhile using Driver Shift Control(DSC), could damage the vehicle.Always upshift when necessarywhile using DSC.