Black plate (48,1)Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-8087803) - 2015 -crc - 6/24/143-48 Seats and Restraintsseating position. If you need toinstall child restraints in both thecenter and left rear seatingpositions, the one in the centerseating position will need to besecured using the vehicle safetybelts instead of the LATCH anchors.Refer to the following illustration tolearn which anchors to use.There are five lower LATCH anchorsin the rear seat.. Use anchors 1 and 2 wheninstalling a child restraint usingLATCH in the right rear seatingposition.. Use anchors 3 and 4 wheninstalling a child restraint usingLATCH in the center rear seatingposition.. Use anchors 4 and 5 wheninstalling a child restraint usingLATCH in the left rear seatingposition.Installing child restraints usingLATCH in the center and left rearseating positions at the same time isprohibited.Make sure to attach the childrestraint at the proper anchorlocation.This system is designed to makeinstallation of child restraints easier.When using lower anchors, do notuse the vehicle's safety belts.Instead use the vehicle's anchorsand child restraint attachments tosecure the restraints. Somerestraints also use another vehicleanchor to secure a top tether.1. Attach and fasten the lowerattachments to the loweranchors. If the child restraintdoes not have lowerattachments or the desiredseating position does not havelower anchors, secure the childrestraint with the top tether andthe safety belts. Refer to thechild restraint manufacturerinstructions and the instructionsin this manual.1.1. Find the lower anchors forthe desired seatingposition.1.2. For outboard rear seatingpositions, put the headrestraint in the uprightposition. See HeadRestraints on page 3-2.1.3. Put the child restraint onthe seat.
