Black plate (47,1)Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-8087803) - 2015 -crc - 6/24/14Seats and Restraints 3-47{ WarningTo reduce the risk of serious orfatal injuries during a crash, donot attach more than one childrestraint to a single anchor.Attaching more than one childrestraint to a single anchor couldcause the anchor or attachmentto come loose or even breakduring a crash. A child or otherscould be injured.{ WarningChildren can be seriously injuredor strangled if a shoulder belt iswrapped around their neck. Theshoulder belt can tighten butcannot be loosened if it is locked.The shoulder belt locks when it ispulled all the way out of theretractor. It unlocks when theshoulder belt is allowed to go all(Continued)Warning (Continued)the way back into the retractor,but it cannot do this if it iswrapped around a child’s neck.If the shoulder belt is locked andtightened around a child’s neck,the only way to loosen the belt isto cut it.Buckle any unused safety beltsbehind the child restraint sochildren cannot reach them. Pullthe shoulder belt all the way outof the retractor to set the lock,and tighten the belt behind thechild restraint after the childrestraint has been installed.{ CautionDo not let the LATCHattachments rub against thevehicle’s safety belts. This may(Continued)Caution (Continued)damage these parts. If necessary,move buckled safety belts toavoid rubbing the LATCHattachments.Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.If you need to secure more than onechild restraint in the rear seat, seeWhere to Put the Restraint onpage 3-42.You cannot secure three childrestraints using the LATCH anchorsin the rear seat at the same time,but you can install two of them.If you want to do this, install oneLATCH child restraint in the rightrear seating position, and install theother one either in the left rearseating position or in the center
