SNMP Configuration• SNMPSelecting Enable will allow the SNMP functionality. Selecting Disable will shut off SNMP functionality.• VersionWith SNMP Enabled, select the corresponding version that matches the SNMP Manager.SNMP v2c• Read-only Community NameThe community string used for accessing the read-only Management Information Bases (MIBs).• Read-write Community NameThe community string used for accessing all Management Information Bases (MIBs) including writable objects.SNMP v3• User NameThe user name for secure access to the Management Information Bases (MIBs) observing v3 standard.• PasswordThe corresponding user password for accessing the Management Information Bases (MIBs) including writableobjects.• AuthenticationSelecting the authentication method for accessing the Management Information Bases (MIBs).Traps• TrapsSelecting Enable will allow the active trap events to be reported to the defined server(s). Selecting Disable willdeactivate events reporting. Up to four destinations can be specified.• Server AddressIP address of server to which the trap events will be sent to.• Server PortThe corresponding server port to which the trap events will be sent to (default 162).Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B | Page 75
