User's Guide — 99How to Set PreferencesThe following sections detail Preference Setting options for the Con-struction Master Pro calculators.Enter the Preference Mode by pressing [Conv] [Stor] (Prefs). Accesseach category by pressing the [Stor] key until you reach the desiredsetting. Within each category, press the [+] or [-] keys to toggle be-tween individual selections. Press [On/C] to exit and set in your Pref-erence.˛˛ Note: [+] will advance, [-] will back up. Pressing the [Stor] key con-tinuously in this mode will revolve the Preference Settings full circle.You may change these settings at any time by repeating the above,and setting in a new preference. Or, you may review settings by press-ing [Rcl] [Stor].To clear preferences, press [Conv] [x].For example, if you wish to display all your dimensional area answersin square meters, press [Conv] [Stor] [Stor] (Area Std), then the [+]key until “Area 0. SQ. M” is displayed. Simply exit this mode by press-ing [On/C] or any key, and all your future area answers will be dis-played in square meters.(See the following pages for Preference Settings per model)
